Naija Talk community
Would you like to react to this message? Create an account in a few clicks or log in to continue.
Naija Talk community

Ghana Lotto Results, F-t-a Satellite Technology, Sport forcast, ICT forum.
 
HomePublicationsSearchRegisterLog in

 

 Full tutorial on Avatar installation

Go down 
Go to page : Previous  1, 2, 3, 4 ... 9, 10, 11  Next
AuthorMessage
John bull
Enthusiast
Enthusiast


Posts : 1864

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-07-06, 12:47

First topic message reminder :

Requirements
1. You MUST have 90cm or 1M dish and one other dish at any size
2. Strong Decoder(Original 4663 or 4669
3. Avatar

Installation
step one
use 90cm to track eutelsat w3 not below 64% signal quality.
Step two
track eutelsat w4, mytv or Nss7 with another dish.
Step three
connect a cable directly from the w3 lnb to the Avatar(you'll see where to connect to it via F-connector).
Step four
remove the cable(2rsr) provided and connect it to Avatar and also connect the other end to the back of the decoder. Make sure you tight it after fixing the cable.
Step five
now connect your w4 cable directly from the lnb to the strong decoder(normal connection).
Now plug the adaptor to your socket and connect to Avatar.
NOTE: MAKE SURE YOU DON'T PRESS THE REMOTE CONTROL SO THAT YOU WILL NOT TEMPER WITH THE SETTINGS.
Next step is setting the decoder for Avatar.
Back to top Go down

AuthorMessage
hayzee
Amateur
Amateur


Posts : 149

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-08, 11:46

@John bull and all, is there any need to update ava*** if the current software is working fine. Or will updating with the software uploaded by digitvtime (if u knw how to do it) extend effectiveness in terms of year and numba of $ TP it can work with. And if you don't know how to update decoders talkless of av****, don't even go there. Otherwise, story go full here oooo!!!
Back to top Go down
Abdullahi
Senior
Senior


Posts : 707

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-08, 13:47

hmn
Back to top Go down
control P
Novice
Novice


Posts : 16

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-09, 06:53

i ave 4669xii nd i live in ogun state..i dont knw whether oga jb has an office here or any1 he can direct me 2 cos i need 2 instal it latest friday.
Back to top Go down
musiotunya
Novice
Novice
musiotunya

Posts : 47

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-09, 09:31

I have an OpenBox S9 and an Avatar 2 dongle and am in Kenya,channels will not open the software in the dongle is AVATAR-2_AFRICA_SOFT_2011-04-28.If i use a Micro Box the channels open,my dish is pointed to the W3 satellite TP 12728V30000.I am not able to get signal on TP12728H30000(H) please help.
Back to top Go down
siyama bello
Novice
Novice


Posts : 6

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-10, 12:51

it is so easy if u can track astra 4a east just very near to nilesat use thi freguency 12605 v 29950 it very close to w3 12728 h 30000. then turn it to vertical it will be easire 4 u
Back to top Go down
siyama bello
Novice
Novice


Posts : 6

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-10, 13:13

hello members there is (2011 mini ft dungle )in town it works like avatar even better, the same way it also WORKS WITH W3
Back to top Go down
Guest
Guest



Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-10, 14:30

pls where can put dual lnb? is it on w3 or w4, i want to be using it to watch Psat ,,,,,,,,,,, pls some body answer me


Last edited by skynetz on 2011-08-10, 16:13; edited 1 time in total
Back to top Go down
musiotunya
Novice
Novice
musiotunya

Posts : 47

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-10, 14:33

Thanks for the reponse,do i need to change the software on my dongle,as what we have is was not the software that came with the dongle,whichsoftware works for Nairobi Kenya ?
Back to top Go down
Drdanskills
Enthusiast
Enthusiast
Drdanskills

Posts : 1797
Location : Benin City

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-10, 19:11

skynetz wrote:
pls where can put dual lnb? is it on w3 or w4, i want to be using it to watch Psat ,,,,,,,,,,, pls some body answer me

Na wa O! Wat's with guys and Psatv sef? Hmm... Psatv is on W3, so obviously using a dual LNB connect it with a disq switch.
Back to top Go down
http://drdanskills@yahoo.com
9jatician
Amateur
Amateur


Posts : 319

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-10, 20:59

skynetz wrote:
pls where can put dual lnb? is it on w3 or w4, i want to be using it to watch Psat ,,,,,,,,,,, pls some body answer me
Repent!!!!!
Back to top Go down
http://naija.canadian-forum.com
sayswilo
Amateur
Amateur


Posts : 130
Location : Enugu

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-11, 08:32

@jb and precious4luv, am a bit confused.Is this avatar different from dongle? And does it open encrypted channels? Also,@jb, u did not conclude the section of the tutorial that said 'now setting the decoder for Avatar'
Back to top Go down
http://www.sinless.com
Patson Kalulu
Novice
Novice


Posts : 43

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-11, 09:45

hi guys, can anyone supply me with an avtar loader?
Back to top Go down
musiotunya
Novice
Novice
musiotunya

Posts : 47

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-11, 10:06

Thanks
i may also be setting up my avatar wrongly.1/power up the OpenBox and blind search.2/connect the dongle to w3 and RS232 3/ power up dongle.
The Lock light blinks on\off red.,Stb light off.The Donle is with AVATAR-2_AFRICA_SOFT_2011-04-28.and reset to factory default.
Back to top Go down
musiotunya
Novice
Novice
musiotunya

Posts : 47

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-11, 10:15

[You must be registered and logged in to see this link.] wrote:
hi guys, can anyone supply me with an avtar loader?
I have a loader but do not know how to upload to the forum
Back to top Go down
siyama bello
Novice
Novice


Posts : 6

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-11, 10:35

[You must be registered and logged in to see this link.] wrote:
[You must be registered and logged in to see this link.] wrote:
hi guys, can anyone supply me with an avtar loader?
I have a loader but do not know how to upload to the forum
pls send him true email
Back to top Go down
musiotunya
Novice
Novice
musiotunya

Posts : 47

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-11, 10:38

[You must be registered and logged in to see this link.] wrote:
[You must be registered and logged in to see this link.] wrote:
[You must be registered and logged in to see this link.] wrote:
hi guys, can anyone supply me with an avtar loader?
I have a loader but do not know how to upload to the forum
give an adresss to send to pls send him true email
Back to top Go down
siyama bello
Novice
Novice


Posts : 6

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-11, 11:05

full setting for avatar and installation. 1.0 SATELLITE SIGNAL AND RS232 CONNECTION 1.1 install dish to right data satellite (w3)connect dish signal to dungle,s lnb in port, 1.2 use packaged rs232 cable to connect to dungle with the receiver (blue or point marked connecter should put on dongle.)receiver must be y4/twin protocol if you are using echolink receiver or normal 4663 strong.1.3 power on adeptor and connect to dc+12 port. 2.0 LED DISPLAY FUNCTION. 2.1 LOCK LED MUST CONNECT RS232 CABLE. RED: DATA SIGNAL NOT LOCK. GREEN:DATA SIGNAL LOCKED ENJOY
Back to top Go down
musiotunya
Novice
Novice
musiotunya

Posts : 47

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-11, 12:19

Thank you for the info,i have done all that but still no decoding.when you do te initial power up on the Avatar and lock light blinks ON off,do i need to connect AV cable to and enter password 0000 ?What transponder should i use if i am in Nairobi
Back to top Go down
Drdanskills
Enthusiast
Enthusiast
Drdanskills

Posts : 1797
Location : Benin City

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-11, 12:48

[You must be registered and logged in to see this link.] wrote:
hi guys, can anyone supply me with an avtar loader?

Why so much confussion about d loader? Digitvtime has done a good job on uploading the loader and upgrade software. Check thru the forum and u'll see it.
Back to top Go down
http://drdanskills@yahoo.com
Patson Kalulu
Novice
Novice


Posts : 43

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-11, 13:01

Drdanskills, digitvtime post da firmware for dongle not the loader, we require the loader to b able 2 instal on the computer n transfer the firmware to the dongle.

Anyway, musiotunya, am unable to post my email address for at least 7 days says the administrator, but any help will be appciated, thanks.
Back to top Go down
Drdanskills
Enthusiast
Enthusiast
Drdanskills

Posts : 1797
Location : Benin City

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-11, 13:05

Link for avatar-2 loader:
[You must be registered and logged in to see this link.]
Back to top Go down
http://drdanskills@yahoo.com
musiotunya
Novice
Novice
musiotunya

Posts : 47

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-11, 16:14

[You must be registered and logged in to see this link.] wrote:
Drdanskills, digitvtime post da firmware for dongle not the loader, we require the loader to b able 2 instal on the computer n transfer the firmware to the dongle.

Anyway, musiotunya, am unable to post my email address for at least 7 days says the administrator, but any help will be appciated, thanks.
do you know of any sofware Guru who can direct to a site where i can upload?
Back to top Go down
Patson Kalulu
Novice
Novice


Posts : 43

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-11, 16:56

Drdanskills, when i try your link its coming up with an error:forbidden access denied, were am i going wrong, please help
Back to top Go down
Patson Kalulu
Novice
Novice


Posts : 43

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-11, 17:08

Drdanskills, it was just setting on my computr but now i have it, will post 2moro, how the ware works thank man!
Back to top Go down
Drdanskills
Enthusiast
Enthusiast
Drdanskills

Posts : 1797
Location : Benin City

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-11, 18:34

U are welcome.
Back to top Go down
http://drdanskills@yahoo.com
weekpzva
Novice
Novice


Posts : 54
Location : Harare,Zimbabwe

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-11, 19:32

am using a strong srt 4669xll and have selected dongle 1 baudrate 115200,but still cant see anything?my decorder has mytv software of january 2011.Do mytv software work or not with avatar?
Back to top Go down
weekpzva
Novice
Novice


Posts : 54
Location : Harare,Zimbabwe

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-11, 19:38

john bull,here in zim hawk dongle works with wiztech decorders well.is there anyway of converting 2011 fta reciever dongle to hawk dongle?if yes help me pliz.
Back to top Go down
siyama bello
Novice
Novice


Posts : 6

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-12, 11:49

[You must be registered and logged in to see this link.] wrote:
Thank you for the info,i have done all that but still no decoding.when you do te initial power up on the Avatar and lock light blinks ON off,do i need to connect AV cable to and enter password 0000 ?What transponder should i use if i am in Nairobi
the transponders are 12728 h 30000, 10976 h 03333. EUTALSAT W3A AT 7 EAST U CANT MISS IT
Back to top Go down
gkwsat
Novice
Novice


Posts : 12
Location : 19S29E

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-12, 13:56

@weekpzva , how can we contact and share.im bro in QQ
Back to top Go down
gkwsat
Novice
Novice


Posts : 12
Location : 19S29E

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-12, 14:01

@weekpzva , how can we contact and share.im ur bro in QQ
Back to top Go down
musiotunya
Novice
Novice
musiotunya

Posts : 47

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-12, 14:44

[You must be registered and logged in to see this link.] wrote:
Link for avatar-2 loader:
[You must be registered and logged in to see this link.]
I upgraded the software to CBT-GX6102(S01-A6V4-USEY2)-2011-07-19 with an Open Box ,doe this work ?
I used a microbox from a friend on W3 1278h30000 and without any effort the pictures were unscrambled why was thsi possible with a Micro and not possible with an Avatar?are working priciple different ?
Back to top Go down
John bull
Enthusiast
Enthusiast


Posts : 1864

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-12, 14:49

[You must be registered and logged in to see this link.] wrote:
john bull,here in zim hawk dongle works with wiztech decorders well.is there anyway of converting 2011 fta reciever dongle to hawk dongle?if yes help me pliz.
converting how?
Back to top Go down
John bull
Enthusiast
Enthusiast


Posts : 1864

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-12, 14:51

[You must be registered and logged in to see this link.] wrote:
@weekpzva , how can we contact and share.im bro in QQ
try writing in full
Back to top Go down
SULIEMAN
Novice
Novice


Posts : 12

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-12, 15:04

Oga jb pls create a thread to teach on how to track direction.
Pls i still have prblm on it. Thanks God bless u.
Back to top Go down
Okoegualek
Senior
Senior
Okoegualek

Posts : 934
Location : BENIN CITY

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-12, 16:50

how and where can i purchase "avatar" and how much?
Back to top Go down
Patson Kalulu
Novice
Novice


Posts : 43

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-12, 17:17

Drdanskills, plz i tried to upload the ware for avtar wit gxdowloader but i was unable to, can you share the how to plz!
Back to top Go down
musiotunya
Novice
Novice
musiotunya

Posts : 47

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-12, 17:37

[You must be registered and logged in to see this link.] wrote:
Drdanskills, plz i tried to upload the ware for avtar wit gxdowloader but i was unable to, can you share the how to plz!

You will first need to do a backup of your existing firmware( incase something goes wrong and need to do a system restore of you current version)
To dump *** .bin file
First power off the dongle.

Link a null cable between the serial port of your computer to the dongle(male Db9 connector to male,pin 2-3,3-2,5-5)
SERIAL PORT: COM1
MODE: Dump
Section: ALL

Then setting as follow:

Chip type:GX6102
Xtal: 4MHZ
flash IF: SPI Flash
memory type:64Mbit
sdram mode:full page

File:create a file name for the bin file for example old 12-08-2011.bin

Choose Download button,

then turn on the power supply of avatar2

Then you will see download progress

Do not power off the dongle till you get 100% complete.

Remove power from dongle and the dump is done.


To upgrade
Like dumping the bin file.
First power off the dongle.
Link a null cable between the serial port of your computer to the dongle(male Db9 connector to male,pin 2-3,3-2,5-5)
SERIAL PORT: COM1
MODE: DOWNLOAD
Section: ALL

Then setting as follow:

Chip type:GX6102
Xtal: 4MHZ
flash IF: SPI Flash
memory type:64Mbit
sdram mode:full page

File:choose the software ********.bin

Choose Download button,

then turn on the power supply of avatar2

Then you will see download progress

Do not power off the dongle till you get 100% complete.

Remove power from dongle and the upgrade is done.


Hope this helps
Back to top Go down
Patson Kalulu
Novice
Novice


Posts : 43

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-12, 17:46

A big thanks Musiotunya, i will try that and let you know what happens!
Back to top Go down
musiotunya
Novice
Novice
musiotunya

Posts : 47

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-12, 18:05

[You must be registered and logged in to see this link.] wrote:
A big thanks Musiotunya, i will try that and let you know what happens!
You are welcome
Back to top Go down
Drdanskills
Enthusiast
Enthusiast
Drdanskills

Posts : 1797
Location : Benin City

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-12, 18:12

Nice.
Back to top Go down
http://drdanskills@yahoo.com
hayzee
Amateur
Amateur


Posts : 149

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-13, 12:54

@ musiotunya, is this file GXDownloader III V2.117- Application(640kb) the .bin file to dump (i.e., the loader) and CBT.GX6102(S01-A6V4-USEY2)-2011-07-19-WinRaR archive-(762kb) the file for upgrade.
@ jb,is it necessary to upgrade, if one avatar 2 is still working well.pls reply.
Back to top Go down
abou1
Senior
Senior
abou1

Posts : 1277
Location : naija

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-13, 18:30

[You must be registered and logged in to see this link.] wrote:
Oga jb pls create a thread to teach on how to track direction.
Pls i still have prblm on it. Thanks God bless u.
dias no prob in tracking,all u need is patience and nt getin tired easily.d basic tins are w3,w6,sirius4 to d left of w4,while nss7 almost directly behind w4, and astra 2ab,badr5 are above w4.mytv blow w4 but slant to right a bit.
Back to top Go down
http://alanengservices.webs.com
Drdanskills
Enthusiast
Enthusiast
Drdanskills

Posts : 1797
Location : Benin City

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-13, 18:36

Brief but very useful.
Back to top Go down
http://drdanskills@yahoo.com
abou1
Senior
Senior
abou1

Posts : 1277
Location : naija

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-13, 18:42

[You must be registered and logged in to see this link.] wrote:
Brief but very useful.
10q
Back to top Go down
http://alanengservices.webs.com
eben.asore
Amateur
Amateur


Posts : 219

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-14, 00:52

[You must be registered and logged in to see this link.] wrote:
[You must be registered and logged in to see this link.] wrote:
Drdanskills, plz i tried to upload the ware for avtar wit gxdowloader but i was unable to, can you share the how to plz!

You will first need to do a backup of your existing firmware( incase something goes wrong and need to do a system restore of you current version)
To dump *** .bin file
First power off the dongle.

Link a null cable between the serial port of your computer to the dongle(male Db9 connector to male,pin 2-3,3-2,5-5)
SERIAL PORT: COM1
MODE: Dump
Section: ALL

Then setting as follow:

Chip type:GX6102
Xtal: 4MHZ
flash IF: SPI Flash
memory type:64Mbit
sdram mode:full page

File:create a file name for the bin file for example old 12-08-2011.bin

Choose Download button,

then turn on the power supply of avatar2

Then you will see download progress

Do not power off the dongle till you get 100% complete.

Remove power from dongle and the dump is done.


To upgrade
Like dumping the bin file.
First power off the dongle.
Link a null cable between the serial port of your computer to the dongle(male Db9 connector to male,pin 2-3,3-2,5-5)
SERIAL PORT: COM1
MODE: DOWNLOAD
Section: ALL

Then setting as follow:

Chip type:GX6102
Xtal: 4MHZ
flash IF: SPI Flash
memory type:64Mbit
sdram mode:full page

File:choose the software ********.bin

Choose Download button,

then turn on the power supply of avatar2

Then you will see download progress

Do not power off the dongle till you get 100% complete.

Remove power from dongle and the upgrade is done.


Hope this helps
Bros, Pls is the null cable different from the RS 232 cable?
Back to top Go down
hayzee
Amateur
Amateur


Posts : 149

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-14, 20:09

the same.
Back to top Go down
eben.asore
Amateur
Amateur


Posts : 219

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-14, 20:31

[You must be registered and logged in to see this link.] wrote:
the same.
Thanks for the reply.
Back to top Go down
obenkutu
Novice
Novice


Posts : 33
Location : Ondo

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-14, 22:32

Oga jb,u be baba;u made many pple feel gud.
Back to top Go down
balooyem
Novice
Novice


Posts : 2

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-14, 22:44

@all
what is happening? my av***2 just stoped working.
Back to top Go down
rotimi1
Novice
Novice


Posts : 2

Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty2011-08-14, 23:04

how do i conect strong fta 2012 to any strong receiver to get madagascar.
Back to top Go down
Sponsored content




Full tutorial on Avatar installation - Page 3 Empty
PostSubject: Re: Full tutorial on Avatar installation   Full tutorial on Avatar installation - Page 3 Empty

Back to top Go down
 
Full tutorial on Avatar installation
Back to top 
Page 3 of 11Go to page : Previous  1, 2, 3, 4 ... 9, 10, 11  Next

Permissions in this forum:You cannot reply to topics in this forum
Naija Talk community :: Africa's no.1 Satellite Technology forum :: Dongle(X-man, Azsky, X-trem, Avatar, Microbox, etc)-
Jump to: